Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs, FL means working with unincorporated Palm Beach County rules, not city permitting, so setbacks from wells, septic drain fields, and easements decide where an exterior door can actually be framed. Most front door replacements on Palm Springs acreage run $2,400 to $5,800 installed, and most interior or back door replacements run $1,900 to $4,200 depending on the opening, the door, and whether county wind mitigation documentation is part of the scope. We quote that written, line by line, before anything gets ordered. Call (728) 203-1160 to schedule a free estimate, and we’ll walk the lot with you before we price it.
Why Lightwell Windows West Palm Beach Is Palm Springs’s Preferred Door Installation Company
Homeowners in Palm Springs call us because we show up knowing the difference between a house on a canal off Greenbrier Drive and a 2-acre lot off Gene Allan Road. That matters when the county is measuring your new entry door against a septic drain field, not a city planner. Keith Yamada leads our team, and he’s the one who returns the call when a question comes up after the crew leaves. We carry a written price on every job, always, and the 365-Day Done Right Promise means if the finished work isn’t right, we make it right. No debate, no countdown.
Our crews wear uniforms and are background-checked. You’ll know who’s at your door before they knock. We lay drop cloths from the threshold to the work area, use shoe covers inside, and take a photo of the cleanup before we pull out of the driveway. The C.A.R.E. values govern every visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. That’s how we operate in Palm Springs, and it’s how we’ve operated since we came into the Cedarwell network in 2010.
When a door won’t close after a storm or a slider binds after a rain, you call us and a live person picks up. Not a phone tree. That’s true at any hour.
Styles & brands we work with
Front Door Replacement in Palm Springs
Front Door Replacement on a Palm Springs acreage home often means removing a door that was framed decades ago, before the county tightened its wind-load and setback requirements. The opening itself may need re-shimming, a new pressure-treated buck, and flashing that holds up to the runoff that moves across flat, low-lying lots during a heavy Florida rain. We scope the grading around the threshold before we quote, because a door swinging inward against driveway pitch is the reason so many sills rot out within two seasons out here. A standard front door replacement in Palm Springs runs $2,400 to $5,800, and a front entry with sidelites or a custom Therma-Tru fiberglass unit can sit at the top of that range.
Impact-Rated Entry Systems
Palm Springs is in a high-velocity hurricane zone, and the county wants to see Miami-Dade NOA or Florida Product Approval on any exterior door that’s part of a wind mitigation filing. We install PGT and Therma-Tru impact-rated entries, and we document the product approvals so the county inspector can sign off without a second trip. That documentation is part of the written quote, not an add-on.
Mid-Century Front Entries
South of Forest Hill Boulevard, you’ll find mid-century ranch homes with narrow front entries and original aluminum frames. Replacing those without losing the look means selecting a door with slim stiles and a finish that doesn’t fight the house. We show homeowners in those neighborhoods actual product samples, not catalog pages, before anyone cuts an opening.
Door Replacement in Palm Springs
Door Replacement in Palm Springs covers everything from a warped back door on a 1960s ranch to a garage side door that won’t seal against the dust and humidity that roll through the interior. The deciding factors out here are the condition of the rough opening, the slab, and where the county measures your setbacks. We replace the door and the frame as a system, because re-hanging a new slab in an old jamb is how you get a door that binds after the first wet season. A typical Palm Springs door replacement runs $1,900 to $4,200 per opening, including removal, haul-away, installation, and a written workmanship warranty.
Rotted Sill and Threshold Work
On acreage lots with poor drainage, the sill is usually the first thing to go. We replace the sill, re-flash the opening, and reset the threshold so water moves away from the door, not under it. If the slab has settled and the rough opening is out of square, we re-shim and lock the new buck before the door goes in.
Wracked Openings on Uncontrolled Fill
Out on a 2-acre lot off Gene Allan Road, our crew pulled a failed sliding glass door from a 1970s ranch and found the jamb had wracked because the slab sat on uncontrolled fill. We re-shimmed the opening, locked a 5/0 PGT 5500 impact-rated slider with a Miami-Dade NOA and Florida Product Approval into a new pressure-treated buck, then re-caulked the exterior flange so the county inspector could sign off on the wind mitigation credit that same week. That’s not a one-off. It’s what we look for on every older Palm Springs home before we write the quote.
Trusted Brands We Service in Palm Springs
We carry Therma-Tru, ViewLux, Mr-Glass, and ECO Window Systems, alongside PGT and CGI impact lines, so the recommendation fits your home rather than whichever vendor we happen to prefer. Because we stock common parts and hardware for these brands, a Palm Springs replacement doesn’t wait on a backorder out of another state. If you already have a Therma-Tru front door or a Mr-Glass slider, we’ll match the existing product family so the new opening doesn’t look like an afterthought. You can see and feel samples before you commit, which matters when the sun in Palm Springs punishes a cheap finish within two years.
See the difference
Before
After
Before
After
Before
AfterCommon Door Installation Problems We See in Palm Springs Homes
- Septic setbacks that kill a door location after the quote. County code measures from the drain field, not the tank, so a door that looks fine on paper can fail permit review once the inspector sees where the leach field actually sits. We check the as-built survey before we frame anything.
- Grading that sends runoff straight at the threshold. On flat, low-lying acreage, a door that swings inward against driveway pitch rots the sill within two rainy seasons. We re-grade or re-flash so water doesn’t test the seal every afternoon storm.
- Slabs poured on uncontrolled fill that wrack the jamb. Older outbuildings and detached garages in Palm Springs often sit on uncompacted fill, so the opening shifts and the door starts binding after the first wet season. We address the buck and the shim pack, not just the slab.
- Mid-century aluminum frames that can’t hold a modern impact door. The original thin aluminum on a 1960s sliding glass door won’t carry a laminated impact unit without a new buck. We preserve the look where possible and tell you straight when the frame has to go.
Pricing for Door Installation in Palm Springs, FL
A front door replacement in Palm Springs runs $2,400 to $5,800 installed. A standard back or side door replacement runs $1,900 to $4,200. A sliding glass door replacement with impact-rated glass runs $3,800 to $7,500 depending on the width and the product approval paperwork. What moves the number on an acreage lot is the condition of the rough opening, whether the jamb has wracked, and whether the county needs a wind mitigation documentation package. We put every line item in writing before we order anything. The price you sign is the price you pay, and the 365-Day Done Right Promise covers the work after the crew leaves. Call (728) 203-1160 for an exact quote. Estimates are free.
We Also Serve Cities Near Palm Springs
Our Palm Springs crews regularly work in Palm Springs and the surrounding communities, including West Palm Beach, Boynton Beach, Palm Beach, and Jupiter. If your home sits in one of those areas, our Door Installation team can coordinate the same written-quote process and the same clean-up standard. We schedule around your lot access, and we always confirm county versus city permitting before the first cut.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Palm Springs
Yes, in most cases. Palm Springs is unincorporated Palm Beach County, so exterior door replacements fall under county building code, and the county requires a permit when the opening, framing, or structural header changes. A like-for-like slab swap in the same jamb sometimes slips through, but the moment we touch the rough opening, the inspector expects paperwork. We pull the permit, schedule the inspection, and hand you the signed card at the end. Call (728) 203-1160 if you want us to check your specific lot before you plan the work.
Palm Beach County measures the setback from the drain field, not the tank, and the required distance depends on your lot’s zoning and the specific system design. Often it’s 10 to 15 feet, but the as-built survey tells the truth faster than a guess. If the door has to move or the opening has to be framed differently to pass, we’ll tell you before the hole is cut, not after.
Yes, provided the product carries a Miami-Dade NOA or Florida Product Approval and the installation is documented for the county’s wind mitigation inspection. A detached workshop or ADU with a properly anchored impact door can support the same mitigation credit as the main house, but the opening still has to be framed with the right header and anchoring. We include the documentation in the written scope on every Palm Springs outbuilding we do.
If the grade pitches run-off toward the threshold, we may need to re-slope the approach, add a channel drain, or raise the sill before the new door goes in. That adds labor and materials, typically $300 to $900 on an acreage lot, but skipping it guarantees a rotted sill within two rainy seasons. We scope it during the free estimate, not as a change order later.
Usually not for a true impact door. The original thin aluminum frames on 1950s-1970s Palm Springs homes were never engineered for the weight or the anchoring a laminated impact unit requires. We can often install a new slim-profile frame that mimics the original sightline, and we’ll show you samples so the replacement doesn’t destroy the mid-century character. Send us a photo of the existing frame and we’ll tell you straight what’s reusable. Call (728) 203-1160 for a free on-site look.
Written by Keith Yamada, Owner at Lightwell Windows West Palm Beach, serving Palm Springs, FL.
Six Reasons Homeowners Choose Lightwell Windows West Palm Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.