Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Window Installation: The West Palm Beach Owner’s Guide
If your Mr-Glass window is fogged, leaking, or the sash won’t stay put, we stock and install Mr-Glass-compatible window replacements throughout West Palm Beach, with most installs running between $450 and $1,100 per opening depending on size and glass package. Most Mr-Glass window replacements we handle are finished the same day we start. You’ll usually notice the failure first as condensation trapped between the panes, a draft you can feel on humid August afternoons, or a sash that binds and won’t close square.
A quick note so there’s no confusion: Lightwell Windows West Palm Beach is an independent window and door company, not affiliated with Mr-Glass or its warranty department. What we do is match the glass, frame dimensions, and hardware correctly, then install it so the window behaves the way it should in a coastal Florida climate.
Which Mr-Glass Models This Applies To
Mr-Glass has manufactured several window lines over the years, most commonly single-hung, horizontal roller, and fixed picture units built for Florida’s impact-rated market. If you cannot find the model label, look for the etched corner marking on the glass or a sticker along the inside frame track, usually on the side jamb. That etching includes the glass type, and in most cases, the frame profile tells us the generation of Mr-Glass product we are matching.
A compatibility gotcha we see often in West Palm Beach: Mr-Glass frames from the mid-2000s used a deeper sash pocket than newer production runs, and a replacement sash from the current line will sit 3/16″ shy of flush if the installer does not shim the track. We check for that on every Mr-Glass job, because an eighth-inch gap at the meeting rail in July means humidity walking right into your living room. When the original part is no longer produced, we specify a quality aftermarket equivalent with matching glass thickness and the same DP rating, not just whatever fits the rough opening.
Key takeaways:
- We match Mr-Glass by frame profile, glass etching, and opening size, not by guesswork.
- Older Mr-Glass frames may need a shimmed retrofit for current production sashes.
- OEM is used when available; quality aftermarket equivalents are sourced only when the original is discontinued.
- Every Mr-Glass replacement we install in West Palm Beach carries our written workmanship warranty.
Styles & brands we work with










Signs Your Mr-Glass Window Installation Is Failing
- Fogging between the panes. The seal around the insulated glass unit has given up, and Florida humidity has worked its way inside. Once you can wipe the outside and the haze stays, the glass unit is done.
- Drafts you can feel near the frame on windy days. The weatherstripping or the frame corner seal has degraded. In West Palm Beach, salt air accelerates that breakdown faster than inland homes see it.
- A sash that sticks, drops, or won’t stay up. Mr-Glass balance systems fatigue over time. The coil or block-and-tackle assembly loses tension, and the window becomes a two-handed job.
- Visible daylight or water staining at the frame corners. The flashing or caulk line has failed at the perimeter. Left alone, this becomes a rot problem in the rough opening, especially on older El Cid homes with wood framing.
- Condensation on the interior glass surface every morning. This usually points to a wider humidity problem inside the home, but when it only happens on one window, that unit’s thermal barrier has failed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Mr-Glass window replacement in West Palm Beach, budget between $450 and $1,100 per opening installed. The spread comes down to glass package (clear, low-E, or impact-rated), sash size, and whether we’re replacing just the glass unit, just the sash, or the full frame. Impact-rated glass lands at the higher end of that range, and if the existing frame has rot or water damage, we’ll quote the repair separately before any work begins.
Every quote is a written line-item price before the first tool comes off the truck. That covers removal, the correct-matched part, installation, flashing and sealing, and clean-up at the end. If the finish is not right, our 365-Day Done Right Promise means we come back and fix it, no debate. That is the standing rule at Lightwell Windows West Palm Beach, and it has been since 2010.
DIY or Call Us?
Replacing a Mr-Glass window involves frames, glass, and in many older West Palm Beach homes, hidden rot in the rough opening. Most replacement work is not something we recommend doing yourself. The danger is rarely the glass as much as the building envelope: a window that is not flashed and sealed correctly leaks into the wall cavity, and by the time you see the stain, the framing has been wet for months.
What you can safely do is confirm which windows are failing, keep the areas clear inside, and let us handle the removal and install with drop cloths down and shoe covers on. If you want a trained eye on it before you commit to anything, call (728) 203-1160. Keith Yamada grew up in Los Angeles, where the light comes in hard and flat, and you learn quickly which windows earn their keep. He’s been making sure West Palm Beach windows do exactly that for years now.
FAQs
A properly installed Mr-Glass window can last 15 to 20 years in Florida’s coastal climate, though the glass seal may fail earlier. Salt air, heavy humidity, and direct sun shorten the useful life compared to inland climates. We stock Mr-Glass-compatible replacements for exactly that reason.
No, a failed insulated glass seal cannot be repaired. The glass unit must be replaced. The frame can often be reused, which keeps the price lower and the install faster. Call (728) 203-1160 for a written quote on the glass-only route.
Most single-window replacements take 90 minutes to three hours from start to clean-up. Full-frame replacements or jobs with rot repair in the rough opening can run longer. We’ll tell you the expected timeframe in writing before work begins.
We stock common Mr-Glass replacement sashes, glass units, balances, and weatherstripping on our trucks. Less common sizes or impact-rated specs are ordered and usually arrive within a few days. We carry parts for PGT, CGI, and CWS as well, so we’re rarely waiting on a specialty piece.
Written by Keith Yamada, Owner, Lightwell Windows West Palm Beach at Lightwell Windows West Palm Beach, serving West Palm Beach and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows West Palm Beach
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.